{"product_id":"davies-craig-digital-thermatic-fan-switch-with-1-4-npt-sensor","title":"Davies Craig, Digital Thermatic Fan Switch With 1\/4\" NPT Sensor","description":"\u003cdiv class=\"text\" id=\"tab-longDescription\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis Digital Thermatic Fan Switch Kit can be used with Thermatic Electric Fans, EWP's and competitors Fans.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt senses air temperature as it passes through the radiator with the sensor placed in the radiator fin section or the sensor can now also be placed directly into the coolant system in combination with a Temperature Sensor Adaptor Kit (Part # 317-DC-0409).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCan be used for 12 or 24* volt applications and has an adjustable temperature range of 104ºF to 230ºF (40°C to 110°C) which can show Centigrade or Fahrenheit. Temp is set by pressing the set button. It can run 1 or 2 fans. The second fan (if applicable) will start 10 seconds after Fan #1 runs. It operated thermally \u0026amp; also when the air conditioning is in operation.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax voltage: 12 to 27V (For 24V, relays need to be changed, not supplied in kit)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax current: 40A per Fan\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRelay setup: Dual relay\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSpeed: Single speed, 10 second delay to start up the second fan\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApplications: Suitable for single and dual fan applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eScreen Display: LED digital temp display, actual temp + set temp\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTemp Display: Centigrade or Fahrenheit\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTemp settings: 40°c to 110°c (104°F to 230°F)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTemp setting: Push Button\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCircuit type: Pre-programmed micro controller\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOutput wires: Batt + Batt - IGN, AC Clutch, Fan #1, Fan #2 Thermistor Probe\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDimensions: 3-3\/4\" (95mm) x 2-9\/16\" (65mm) x 2-3\/16\" (56mm)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe unit is NOT WaterProof\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSensor Wire length: 142cm in total (Wire from switch 112cm plus sensor connector 30cm)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eKIT CONTENTS\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eDigital Fan Switch IP66     1\u003cbr data-mce-fragment=\"1\"\u003eThermal Sensor Proble     1\u003cbr data-mce-fragment=\"1\"\u003eMounting Kit for Thermal Sensor Probe     1\u003cbr data-mce-fragment=\"1\"\u003e¼ NPT Thermal Sensor     1 (DC-0465)\u003cbr data-mce-fragment=\"1\"\u003eRed 6mm Ring Terminal     1\u003cbr data-mce-fragment=\"1\"\u003eBlue 6mm Ring Terminal     1\u003cbr data-mce-fragment=\"1\"\u003eBlue Wire Joiner     2\u003cbr data-mce-fragment=\"1\"\u003eSelf Tap Screw     2\u003cbr data-mce-fragment=\"1\"\u003eInstructions     1\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e*Note: if using this switch for use with our EWP's, it will not vary the speed of the pump in response to engine temperature but rather turn the pump on and off at your set temperature. For EWP (Electric Water Pump) control, we would recommend part number 8001 which can manage both the EWP and your Thermatic Fans.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e*Note: Kit sold in 12 volt configuration, for 24 volt application, you will need to change the two relays with 2 x 24 volt units which are not supplied in the kit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Davies Craig","offers":[{"title":"Default Title","offer_id":43180585910525,"sku":"DC-0445","price":115.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/products\/image_22_23168209-a20b-49f2-9d36-66212de0fd8f.jpg?v=1706868024","url":"https:\/\/prolinkperformance.com\/products\/davies-craig-digital-thermatic-fan-switch-with-1-4-npt-sensor","provider":"Prolink Performance","version":"1.0","type":"link"}