{"title":"- Digital Gauges","description":"","products":[{"product_id":"aem-x-series-obdii-wideband-afr-controller-gauge","title":"AEM X-Series OBDII Wideband AFR Controller Gauge","description":"\u003cp\u003e\u003cstrong\u003eX-SERIES WIDEBAND UEGO CONTROLLER FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented X-Digital Technology makes it the Fastest Responding Wideband AFR Controller (Patent # 9,575,030)\u003c\/li\u003e\n\u003cli\u003eOBDII pass-through provides AFR readings through the factory ECU CAN-bus – Ideal for users with piggyback programmers or open source tuning software\u003c\/li\u003e\n\u003cli\u003eIncludes Bosch 4.9LSU wideband UEGO sensor and OBDII pass-through connector\u003c\/li\u003e\n\u003cli\u003eUse the factory 02 calibration or free-air calibrate using buttons on faceplate\u003c\/li\u003e\n\u003cli\u003eCompatible with vehicle\/system voltages up to 16V\u003c\/li\u003e\n\u003cli\u003eOptional outputs for 0-5V \u0026amp; RS232 for data logging and feedback control \u003cstrong\u003e(requires wiring)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan display AFR values in hundredths of %\u003c\/li\u003e\n\u003cli\u003e52mm gauge diameter and slim 0.825” gauge depth\u003c\/li\u003e\n\u003cli\u003eGauge cup depth only .200” deep!\u003c\/li\u003e\n\u003cli\u003eAuto dimming feature\u003c\/li\u003e\n\u003cli\u003eUser configurable display via buttons on the gauge face for changing AFR values, Lambda and O2%, 3- or 4-digit display and OBDII output settings (if necessary)\u003c\/li\u003e\n\u003cli\u003eBlack bezel and black dual faced faceplate included (silver bezel\/white gauge option sold separately, PN 30-0300-ACC)\u003c\/li\u003e\n\u003cli\u003eLocking connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eAFR VALUE RANGE BY FUEL TYPES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay Gasoline values from 8.0:1 to 20.0:1 AFR\u003c\/li\u003e\n\u003cli\u003eDisplay Lambda values from .55 to 2.00\u003c\/li\u003e\n\u003cli\u003eOBDII Output Gasoline values from 8.0:1 to 20.0:1 AFR\u003c\/li\u003e\n\u003cli\u003eOBDII Output Lambda values from .55 to 2.00\u003c\/li\u003e\n\u003cli\u003e0-5V Output Gasoline values from 8.5:1 to 18.0:1 AFR \u003cstrong\u003e(Requires Wiring)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e0-5V Output Lambda values from .58 to 1.23 \u003cstrong\u003e(Requires Wiring)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e0-5V Output E85 values from 5.7:1 to 12.0:1 AFR \u003cstrong\u003e(Requires Wiring)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e0-5V Output Ethanol values from 5.2:1 to 11.0:1 AFR \u003cstrong\u003e(Requires Wiring)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e0-5V Output Methanol values from 3.75:1 to 8.0:1 AFR \u003cstrong\u003e(Requires Wiring)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792290582781,"sku":"(30-0334)","price":510.0,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/products\/eba752_320d25cc345643208fa2466cbb97252c_mv2.jpg?v=1706867699"},{"product_id":"aem-x-series-air-fuel-ratio-gauge-patented-x-digital-technology","title":"AEM X-Series Air Fuel Ratio Gauge, Patented X-Digital Technology","description":"\u003cp\u003e\u003cstrong\u003eX-SERIES WIDEBAND UEGO CONTROLLER FEATURES:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eX-Series Wideband UEGO AFR Controller Gauge were fastest responding wideband air\/fuel ratio controllers in an independent test vs. 17 competitors wideband AFR controllers\u003c\/li\u003e\n\u003cli\u003ePatented X-Digital wideband technology (Patent 9,575,030)\u003c\/li\u003e\n\u003cli\u003eIncludes Bosch 4.9LSU wideband UEGO sensor\u003c\/li\u003e\n\u003cli\u003eFactory calibrated resistor does not require free-air calibration, but technology allows for free-air calibration as sensor ages if user desires\u003c\/li\u003e\n\u003cli\u003eCompatible with vehicle\/system voltages up to 16V\u003c\/li\u003e\n\u003cli\u003e0-5V \u0026amp; RS232 output for data logging and feedback control, AEMnet (CANbus) for data logging and daisy-chaining multiple controllers up to 16 cylinders\u003c\/li\u003e\n\u003cli\u003eCan display AFR values in hundredths of %\u003c\/li\u003e\n\u003cli\u003e52mm gauge diameter and slim 0.825” gauge depth\u003c\/li\u003e\n\u003cli\u003eGauge cup depth only .200” deep!\u003c\/li\u003e\n\u003cli\u003eAuto dimming feature\u003c\/li\u003e\n\u003cli\u003eUser configurable display via buttons on the gauge face for changing AFR values, Lambda and O2%, and 3- or 4-digit display\u003c\/li\u003e\n\u003cli\u003eBlack bezel and black dual faced faceplate included (gauge only, silver bezel\/white gauge option sold separately, PN 30-0300-ACC)\u003c\/li\u003e\n\u003cli\u003eLocking connectors\u003c\/li\u003e\n\u003cli\u003eOutput to LINK ECU for Data logging YES - Limit Triggering NO\u003c\/li\u003e\n\u003cli\u003eAEM 30-0300 Comes as a complete Kit, everything you need to have it working.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792290648317,"sku":"30-0300","price":419.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/products\/eba752_e3ff6adebafb44f2b819bb2e5937e4c8_mv2.jpg?v=1706867704"},{"product_id":"aem-boost-gauge-30-to-50psi-displays-pressure-outputs-to-data-loggers","title":"AEM Classic Digital HI-BOOST Gauge Kit - Reads from -30 to 50 PSI","description":"\u003cp data-mce-fragment=\"1\"\u003eAEM's Digital Boost Display Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays boost in 1 PSI increments, and a sweeping LED \"needle\" that lines the edge and moves as boost from 0 to up to 50PSI. The boost gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAEM's digital boost gauges include a 0-5v analog output for use with data loggers and virtually any engine management system, such as the Infinity ECU, Series 2 EMS or AQ-1 Data Logger, making it the perfect solution for users who need to monitor and data log boost at high RPM on tuned engines. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE: For boost control solutions please see our TRU-BoostX Controller Gauge PN: 30-0352.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIdeal for carbureted or EFI vehicles\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy-to-install Plug \u0026amp; Play harness and sensor included\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 green LED display lights provide immediate reference to monitored engine function\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThree digit readout in center\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEach gauge\u003cstrong data-mce-fragment=\"1\"\u003e comes with interchangeable black\/silver bezels\u003c\/strong\u003e and black\/white faceplates\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0-5V analog output included for use with data loggers and virtually any engine management system\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto-dimming gauge face and read out lighting\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBrass sensor included\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStandard 52mm (2-1\/16”) gauge housing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e30-4406 displays boost from -30 - 35 PSI\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e30-4408 displays boost from -30 - 50 PSI\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792591884541,"sku":"30-4408","price":430.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/files\/AEMCLASSICDIGITALHI-BOOSTGAUGEKITReadsfrom-30to50PSI.jpg?v=1707081302"},{"product_id":"aem-oil-pressure-gauge-0-150psi-includes-blk-white-display","title":"AEM Oil Pressure Gauge, 0~150PSi, Includes BLK\/White Display","description":"\u003cp data-mce-fragment=\"1\"\u003ePN: 30-4401 (0 to100psi) \u0026amp; PN: 30-4407 (0 to 150psi) - Displays oil pressure and outputs to data loggers\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAEM Digital Oil Pressure Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays oil pressure in 1 PSI increments, and a sweeping LED \"needle\" that lines the edge and moves as oil pressure changes from 0 to 100. The oil pressure gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAEM's digital oil pressure gauges include a 0-5v analog output for use with data loggers and virtually any engine management system, such as the Infinity ECU, Series 2 EMS or AQ-1 Data Logger, making them the perfect solution for users who need to monitor and data log oil pressure at high RPM on tuned engines\u003cbr data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIdeal for carbureted or EFI vehicles\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy-to-install Plug \u0026amp; Play harness and sensor included\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 green LED display lights provide immediate reference to monitored engine function\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThree digit readout in center\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEach gauge comes with interchangeable black\/silver bezels and black\/white faceplates\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0-5V analog output included for use with data loggers and virtually any engine management system\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto-dimming gauge face and read out lighting\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e100 PSIg brass sensor included\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e30-4401 displays oil pressure from 0-100 PSI\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e30-4407 displays oil pressure from 0-150 PSI\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStandard 52mm (2-1\/16”) gauge housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792591917309,"sku":"30-4407","price":369.0,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/files\/AEMCLASSICDIGITALOILPRESSUREGAUGEKITOil_FuelPressurefrom0-150PSI.jpg?v=1707167907"},{"product_id":"aem-boost-gauge-30-to-35psi-displays-pressure-outputs-to-data-loggers","title":"AEM Classic Boost Display Gauge Kit Reads from -30 to 35 PSI","description":"\u003cp data-mce-fragment=\"1\"\u003eAEM's Digital Boost Display Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays boost in 1 PSI increments, and a sweeping LED \"needle\" that lines the edge and moves as boost from 0 to up to 35PSI. The boost gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAEM's digital boost gauges include a 0-5v analog output for use with data loggers and virtually any engine management system, such as the Infinity ECU, Series 2 EMS or AQ-1 Data Logger, making it the perfect solution for users who need to monitor and data log boost at high RPM on tuned engines. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE: For boost control solutions please see our TRU-BoostX Controller Gauge PN: 30-0352.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIdeal for carbureted or EFI vehicles\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy-to-install Plug \u0026amp; Play harness and sensor included\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 green LED display lights provide immediate reference to monitored engine function\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThree digit readout in center\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEach gauge\u003cstrong data-mce-fragment=\"1\"\u003e comes with interchangeable black\/silver bezels\u003c\/strong\u003e and black\/white faceplates\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0-5V analog output included for use with data loggers and virtually any engine management system\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto-dimming gauge face and read out lighting\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBrass sensor included\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStandard 52mm (2-1\/16”) gauge housing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e30-4406 displays boost from -30 - 35 PSI\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e30-4408 displays boost from -30 - 50 PSI\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792591950077,"sku":"30-4406","price":325.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/files\/AEMCLASSICBOOSTDISPLAYGAUGEKITReadsfrom-30to35PSI_2.jpg?v=1707080988"},{"product_id":"aem-digital-transmission-temp-gauge-100-300f-includes-blk-white-display","title":"AEM Digital Transmission Temp Gauge, 100-300F, Includes BLK\/White Display","description":"\u003cp data-mce-fragment=\"1\"\u003eThe AEM Digital Transmission Temperature Gauge combines unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays transmission temperature in 1 degree increments, and a sweeping LED \"needle\" that lines the edge and moves as transmission temp changes from 0 to 100. The transmission temperature gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAEM's digital transmission temperature gauge includes a 0-5v analog output for use with data loggers and virtually any engine management system, such as the Infinity ECU, Series 2 EMS or AQ-1 Data Logger, making it the perfect solution for users who need to monitor and data log trans temp at high RPM on tuned engines. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGauge Readout from 100 to 300F\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTemperature gauge includes AEM brass sensor\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIdeal for carbureted or EFI vehicles\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy-to-install Plug \u0026amp; Play harness and sensor included\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 green LED display lights provide immediate reference to monitored engine function\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEach gauge comes with interchangeable black\/silver bezels and black\/white faceplates\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0-5V analog output included for use with data loggers and virtually any engine management system\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThree-digit digital readout to exact degree\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto-dimming gauge face and read out lighting\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo laptop required for monitoring\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStandard 52mm (2-1\/16”) gauge housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e52mm (2 1\/16th inch) gauge housing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 Green LED lights along outer edge\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThree digit readout in center\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto dimming\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0-5v analog output\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBrass sensor included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792591982845,"sku":"30-4402","price":330.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/files\/AEMCLASSICDIGITALTEMPERATUREGAUGEKITOil_Trans_Waterfrom100-300DegreesFahrenheit.jpg?v=1707082081"},{"product_id":"aem-oil-pressure-gauge-0-100psi-includes-blk-white-display","title":"AEM Oil Pressure Gauge, 0~100PSi, Includes BLK\/White Display","description":"\u003cp data-mce-fragment=\"1\"\u003eThe AEM Digital Voltmeter Gauge combines unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays voltage in 1 volt increments, and a sweeping LED \"needle\" that lines the edge and moves as voltage changes from 8 to 18v. The voltmeter gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEach gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGauge Readout from 8 to 18V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIdeal for carbureted or EFI vehicles\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy-to-install Plug \u0026amp; Play harness and sensor included\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 green LED display lights provide immediate reference to monitored engine function\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThree digit readout in center\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDigit digital readout displays precise voltage\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto-dimming gauge face and read out lighting\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStandard 52mm (2-1\/16”) gauge housing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792592015613,"sku":"30-4401","price":409.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/files\/AEM-Oil-Pressure-Gauge-0-100PSi-Includes-BLK-White-Display-Prolink-Performance-3353.jpg?v=1706907116"},{"product_id":"aem-voltage-display-gauge-8-18v-includes-blk-white-display","title":"AEM Voltage Display Gauge, 8-18V, Includes BLK\/White Display","description":"\u003cp data-mce-fragment=\"1\"\u003eThe AEM Digital Voltmeter Gauge combines unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays voltage in 1 volt increments, and a sweeping LED \"needle\" that lines the edge and moves as voltage changes from 8 to 18v. The voltmeter gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEach gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGauge Readout from 8 to 18V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIdeal for carbureted or EFI vehicles\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy-to-install Plug \u0026amp; Play harness and sensor included\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 green LED display lights provide immediate reference to monitored engine function\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThree digit readout in center\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDigit digital readout displays precise voltage\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto-dimming gauge face and read out lighting\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStandard 52mm (2-1\/16”) gauge housing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792592048381,"sku":"30-4400","price":269.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/products\/eba752_452837527ff84c5b98e31e9ded1e8889_mv2.jpg?v=1706867707"},{"product_id":"aem-x-series-tru-boost-two-boost-levels-scramble-boost-setting","title":"AEM X-Series Tru-Boost, Two Boost Levels \u0026 Scramble Boost Setting","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eA boost display gauge and boost controller in one!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to program – no laptop required\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBoost control solenoid and all necessary hardware included\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOn-board 80PSIg MAP sensor—no upgrade kit needed for high boost vehicles\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eTwo boost level settings\u003c\/strong\u003e and scramble boost setting\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWastegate open pressure setting for controlling boost spikes and faster spool\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDisplay boost levels in PSI, BAR or kPa\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOverboost protection and programmable alarms, ground output for optional LED warning light\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePeak boost level recall\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eX-Series design for the best visibility (87% larger center LED and 33% larger face design)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eX-Series dimensions make it easier to install (0.825” overall depth, 0.20” cup depth)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAEMnet CAN bus enabled for data logging (13 channels of data over 2-wire connection)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStandard 52mm (2-1\/16”) cup\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 programmable green outer LEDs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto dimming sensor for ideal brightness day or night\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePositive locking connectors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptional silver bezel with white faceplate accessory kit (30-0352-ACC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOverview:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e(NOTE: The original 30-4350 Tru Boost Controller Gauge is discontinued and has been replaced with the 30-0352 X-Series Tru-BoostX Controller Gauge, below)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Tru-BoostX Boost Controller Gauge delivers all of the features you loved about the original only now with AEMnet for data logging and a big, fat internal MAP sensor that can handle boost pressures up to 80 PSI of boost.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Tru-BoostX Boost Controller gauge delivers digital accuracy but with the simplicity of a manual boost controller. All programming is done using the faceplate buttons and no laptop is required. AEM’s specially designed Boost Control Solenoid and all necessary hardware is included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eProgram Two Boost Levels + Scramble Boost Setting\u003c\/strong\u003e – Program two boost modes for different levels of performance (up to 80PSIg internal MAP sensor), and program a time-based scramble boost setting that is controlled using a switched input. You can also turn off the controller and use the gauge as a display.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eChange Wastegate Open Pressure\u003c\/strong\u003e—Ideal for reducing boost spikes and improving spool up.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDisplay Boost Levels in PSIg (PSI), BAR or kPa (PAS)\u003c\/strong\u003e –See your boost in the units you prefer, and scale the 24 outer LEDs to match your peak boost levels for the perfect sweeping motion.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSet Alarms and Display Peak Boost\u003c\/strong\u003e—Set the 24 green outer LEDs to flash based on boost pressure so you are alerted to an overboost condition. A ground output is included for triggering an optional LED warning light. Select the “B” button to see peak boost level and clear the value using the menu.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOverboost Protection Built In\u003c\/strong\u003e—Protects your engine from an overboost condition by shutting the boost control solenoid off until it is reactivated by you through the buttons on the faceplate.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIntegrated Error Protection\u003c\/strong\u003e—Alerts you to a fault if the boost control solenoid is shorted or disconnected so you are never left guessing whether the Tru-BoostX is operational.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDatalog using AEMnet CAN bus\u003c\/strong\u003e—Outputting channels over AEMnet provides so much more than just boost pressure! Send 13 channels of data over a 2-wire connection, including boost pressure, peak boost, boost target, boost scramble duty, overboost status, wastegate crack pressure, boost control solenoid status and more.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792775254269,"sku":"30-0352","price":699.0,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/products\/eba752_75d6b02892794f8ea8947cb5909b65cc_mv2.jpg?v=1706913662"},{"product_id":"aem-x-series-digital-gps-speedometer-for-aem-infinity-other-ecus","title":"AEM X-Series Digital GPS Speedometer for AEM Infinity \u0026 Other ECUs","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote:\u003c\/strong\u003e If an alternative ECUs (like Link\/Haltech etc) have a configurable CAN input, the AEM gauge does have a CAN output for vehicle speed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOtherwise, the gauge also does have an optional 12v pulsed output that can be used with most aftermarket ECUs and datalogger. More information on this can be found on page 4.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ehttps:\/\/www.aemelectronics.com\/files\/instructions\/30-0313-X-Series-GPS-Speedometer-Gauge-Instructions.pdf\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAEM’s X-Series GPS Speedometer (PN 30-0313) display ground speed, course and altitude via an included 10Hz GPS receiver. Users can integrate the X-Series GPS Speedo into an Infinity ECU to add track mapping, and an included Vehicle Speed signal can be outputted to an existing speedometer to eliminate the need for a vehicle speed sensor.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA 10Hz GPS receiver receives speed, heading and altitude data from multiple satellites at 10 samples\/second providing excellent accuracy and reliability. The GPS receiver includes a magnet and adhesive bottom for exterior mounting on the vehicle.\u003cbr data-mce-fragment=\"1\"\u003eThe X-Series GPS Speedometer Gauge has a bright four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. X-Series Gauges come with a black bezel and faceplate, and an optional silver bezel\/white faceplate accessory kit is available (PN 30-0313-ACC, sold separately).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDisplays ground speed, heading and altitude!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIntegrate with the Infinity ECU via AEMnet CAN bus to add track mapping!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTransmit vehicle speed to an existing speedometer without needing a VSS sensor\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUser selectable units of measurement (US or Metric)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptional silver bezel with white faceplate accessory kit available (sold separately, PN 30-0313-ACC)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePositive locking connector provides secure connection\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with 16v vehicle systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792775287037,"sku":"(30-0313)","price":319.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/products\/eba752_c79026ef1f2645e18370a3cb280cfb84_mv2.jpg?v=1706913662"},{"product_id":"aem-x-series-boost-fuel-pressure-gauge-0-15psi","title":"AEM X-Series Boost \/ Fuel Pressure Gauge 0~15PSI","description":"\u003cp data-mce-fragment=\"1\"\u003eAEM’s 30-0309 X-Series 0~15PSI Digital Boost\/Fuel Pressure Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate boost or fuel pressure readouts up to 15 PSI in their high performance supercharged or carbureted vehicle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE: The 30-0309 comes with a black bezel and reversible black PSI Boost\/Fuel Pressure faceplate. You will need to purchase the optional 30-0309-ACC accessory kit to get the silver bezel and reversible white PSI Boost\/Fuel Pressure faceplate. The faceplate is double sided with Boost PSI on one side and Fuel Pressure PSI on the other.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEASIER TO READ\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEASIER TO MOUNT\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSMARTER INTERFACE\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCenter LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUser selectable threshold warnings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptional silver bezel with white faceplate accessory kit available (sold separately)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792775319805,"sku":"(30-0309)","price":409.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/products\/eba752_a20ae192a2994cbaa28a7ff66117ead3_mv2.jpg?v=1706913661"},{"product_id":"aem-x-series-60psi-4bar-boost-display-gauge","title":"AEM X-Series 60PSI \/ 4BAR Boost Display Gauge","description":"\u003cp data-mce-fragment=\"1\"\u003eAEM’s 30-0308 X-Series -30in\/Hg~60PSI \/ -1~4BAR Digital Boost Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate boost pressure readouts up to 60 PSI or 4 BAR in their high performance vehicle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE: The 30-0308 comes with a black bezel and reversible black PSI\/BAR boost pressure faceplate. You will need to purchase the optional 30-0308-ACC accessory kit to get the silver bezel and reversible white standard\/metric boost pressure faceplate. Each faceplate is double sided with standard PSI on one side and metric BAR on the other. The calibration for standard or metric display is easily performed using the buttons on the face of the gauge.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEASIER TO READ\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEASIER TO MOUNT\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSMARTER INTERFACE\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProgrammable center LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUser selectable standard or metric display ( -30in\/Hg~60PSI \/ -1~4BAR)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUser selectable threshold warnings (excl. Volts)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptional silver bezel with white faceplate(s) accessory kits available (sold separately)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792775352573,"sku":"(30-0308)","price":569.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/products\/eba752_166e85c3c6fe4007abca0e9000f01da7_mv2.jpg?v=1706913661"},{"product_id":"aem-x-series-oil-pressure-gauge-0-150psi-0-10bar","title":"AEM X-Series Oil Pressure Gauge, 0~150psi \/ 0~10bar","description":"\u003cp data-mce-fragment=\"1\"\u003eAEM’s 30-0307 X-Series 150 PSI\/10 BAR Digital Oil Pressure gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate oil or fuel pressure readouts in their high performance vehicle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE: The 30-0307 comes with a black bezel and black oil pressure faceplate. You will need to purchase the optional 30-0307-ACC accessory kit to get the silver bezel and white oil pressure faceplate. Each faceplate is double sided with standard PSI on one side and metric BAR on the other. The calibration for standard or metric display is easily performed using the buttons on the face of the gauge.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEASIER TO READ\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEASIER TO MOUNT\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSMARTER INTERFACE\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProgrammable center LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUser selectable standard or metric display (0-150 PSI\/0-10 BAR)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUser selectable threshold warnings (excl. Volts)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptional silver bezel with white faceplate(s) accessory kits available (sold separately)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792775385341,"sku":"(30-0307)","price":459.0,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/products\/eba752_166e85c3c6fe4007abca0e9000f01da7_mv2_1.jpg?v=1706913660"},{"product_id":"aem-x-series-boost-pressure-gauge-30-35psi-1-2-5ba","title":"AEM X-Series Boost Pressure Gauge, -30~35psi \/ -1~2.5Ba","description":"\u003cp data-mce-fragment=\"1\"\u003eAEM's Digital Boost Display Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays boost in 1 PSI increments, and a sweeping LED \"needle\" that lines the edge and moves as boost from 0 to up to 35PSI. The boost gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAEM's digital boost gauges include a 0-5v analog output for use with data loggers and virtually any engine management system, such as the Infinity ECU, Series 2 EMS or AQ-1 Data Logger, making it the perfect solution for users who need to monitor and data log boost at high RPM on tuned engines. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE: For boost control solutions please see our TRU-BoostX Controller Gauge PN: 30-0352.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIdeal for carbureted or EFI vehicles\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy-to-install Plug \u0026amp; Play harness and sensor included\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 green LED display lights provide immediate reference to monitored engine function\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThree digit readout in center\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEach gauge\u003cstrong data-mce-fragment=\"1\"\u003e comes with interchangeable black\/silver bezels\u003c\/strong\u003e and black\/white faceplates\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0-5V analog output included for use with data loggers and virtually any engine management system\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto-dimming gauge face and read out lighting\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBrass sensor included\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStandard 52mm (2-1\/16”) gauge housing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e30-4406 displays boost from -30 - 35 PSI\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e30-4408 displays boost from -30 - 50 PSI\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792775418109,"sku":"(30-0306)","price":399.0,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/files\/image_68_8ec2fd9d-c53a-4bb0-afac-8f893e794b1a.jpg?v=1706913660"},{"product_id":"aem-x-series-digital-exhaust-gas-gauge-0-1800f-0-1000c","title":"AEM X-Series Digital Exhaust Gas Gauge, 0~1800F \/ 0~1000C","description":"\u003cp data-mce-fragment=\"1\"\u003eAEM’s 30-0305 X-Series 0-1800F\/0-1000C Digital Exhaust Gas Temperature (EGT) gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want a highly accurate EGT readout in their high performance vehicle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE: The 30-0305 comes with a black bezel and reversible Fahrenheit\/Celsius black EGT faceplate. You will need to purchase the optional 30-0305-ACC accessory kit to get the silver bezel and reversible white EGT faceplate. The calibration for standard or metric display is easily performed using the buttons on the face of the gauge.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEASIER TO READ\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEASIER TO MOUNT\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSMARTER INTERFACE\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProgrammable 3- or 4-digit center LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUser selectable threshold warnings (excl. Volts)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptional silver bezel with white faceplate(s) accessory kits available (sold separately)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792775549181,"sku":"(30-0305)","price":499.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/products\/eba752_ab991ff8704c4294a7dfa508b9f6b9ca_mv2.jpg?v=1706867737"},{"product_id":"aem-x-series-volts-gauge-8-18v","title":"AEM X-Series Volts Gauge, 8~18V","description":"\u003cp data-mce-fragment=\"1\"\u003eAEM’s 30-0303 X-Series Digital Voltmeter gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly a accurate voltage readout in their high performance vehicle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE: The 30-0303 comes with a black bezel and black 8-18 Volts faceplate. You will need to purchase the optional 30-0303-ACC accessory kit to get the silver bezel and white Volts faceplate.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEASIER TO READ\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEASIER TO MOUNT\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSMARTER INTERFACE\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall on the Volts gauge. All X-Series gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProgrammable LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 green outer LEDs for quick reference to system voltage\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptional silver bezel with white faceplate accessory kit available (sold separately)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792775680253,"sku":"(30-0303)","price":309.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/products\/eba752_86eaeae2533c4687958c09aa56418fde_mv2.jpg?v=1706867736"},{"product_id":"aem-x-series-water-transmission-oil-temperature-gauge-40-150c","title":"AEM X-Series Water\/Transmission\/Oil Temperature Gauge 40-150C,","description":"\u003cp data-mce-fragment=\"1\"\u003eAEM’s 30-0302 X-Series 100-300 F\/40-150C Digital Gauge combine incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate water, transmission and\/or oil or temperature readouts in their high performance vehicle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE: The 30-0302 comes with a black bezel and black water temperature faceplate. \u003c\/strong\u003eYou will need to purchase the optional 30-0302-ACC accessory kit to get the silver bezel, white water, transmission and oil temp faceplates, and black transmission and oil temperature faceplates. Each faceplate is double sided with standard PSI on one side and metric BAR on the other. The calibration for standard or metric display is easily performed using the buttons on the face of the gauge.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEASIER TO READ\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEASIER TO MOUNT\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSMARTER INTERFACE\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProgrammable center LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUser selectable standard or metric display (100-300 F\/40-150 C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUser selectable threshold warnings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptional silver bezel and faceplate accessory kits available (sold separately)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792775942397,"sku":"(30-0302)","price":399.0,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/products\/eba752_269503688e084bf59963c9539d744587_mv2.jpg?v=1706867736"},{"product_id":"aem-x-series-oil-fuel-pressure-gauge-0-100psi","title":"AEM X-Series Oil\/Fuel Pressure Gauge, 0~100psi","description":"\u003cp data-mce-fragment=\"1\"\u003eAEM’s 30-0307 X-Series 150 PSI\/10 BAR Digital Oil Pressure gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate oil or fuel pressure readouts in their high performance vehicle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE: The 30-0307 comes with a black bezel and black oil pressure faceplate. You will need to purchase the optional 30-0307-ACC accessory kit to get the silver bezel and white oil pressure faceplate. Each faceplate is double sided with standard PSI on one side and metric BAR on the other. The calibration for standard or metric display is easily performed using the buttons on the face of the gauge.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEASIER TO READ\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEASIER TO MOUNT\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSMARTER INTERFACE\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProgrammable center LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUser selectable standard or metric display (0-150 PSI\/0-10 BAR)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUser selectable threshold warnings (excl. Volts)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptional silver bezel with white faceplate(s) accessory kits available (sold separately)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":42792776139005,"sku":"(30-0301)","price":425.0,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0637\/0417\/0749\/products\/eba752_166e85c3c6fe4007abca0e9000f01da7_mv2_2.jpg?v=1706867736"}],"url":"https:\/\/prolinkperformance.com\/collections\/digital-gauges.oembed","provider":"Prolink Performance","version":"1.0","type":"link"}